Installation | Reference guide how to install a standard A1 box
install Wall Mount : guide line Only
- Put the box in the place you wish to fix it to the wall.
- Make sure the back plate is flush with the wall for maximum strength.
- Use a pencil and mark the four holes.
- Move the box to one side.
- Use a 14mm diameter masonry drill bit.
- Attach the raw bolts thru the box.
- Position the box so that you can push the box into place and put the raw bolts into the wall.
- Tighten the 4 bolts by hand to make sue everything fits correctly.
- Use a 13mm spanner or socket to tighten the bolts.
- Check that the unit is in firmly.
- Can be secured to both wall and floor.
install Floor Mount : guide line Only
- Put the box in the place you wish to fix it to the wall.
- Make sure the back plate is flush with the wall for maximum strength.
- Use a pencil and mark the four holes.
- Move the box to one side.
- Use a 14mm diameter masonry drill bit.
- Attach the raw bolts thru the box.
- Position the box so that you can push the box into place and put the raw bolts into the wall.
- Tighten the 4 bolts by hand to make sue everything fits correctly.
- Use a 13mm spanner or socket to tighten the bolts.
- Check that the unit is in firmly.
- Can be secured to both wall and floor.
Securing the computer
- Unplug all the connections to your computer case.
- Check that your computer box fits into the Secure-A-Box.
- Check that all the power and wiring connections are long enough, if not, move the box to a closer location and / or consult your IT department / expert for advice.
- Install the Secure-A-Box. Installation instruction on the reverse side.
- Make sure the base plate is inserted.
- Lift the front lid and slide the computer box about half way.
- Attach all the cables that are required to the back of the computer case.
- Slide the PC case in and close the lid.
- Press the pin in and make sure the lid is locked into place.
- Remove the key and store in a safe place.
- You may need to move the internal CD or DVD Writer up or down one slot in the computer case if the CD tray does not open fully due to the front lid restricting the movement of the tray.
important Notice
- You must make sure you have the correct authority & or permission to drill the holes prior to installation.
Check wall and floors have no pipes, electrical cables or other items you may possibly drill through or into.
The instructions are guidelines only. - When installing the secure-a-box, obey all laws, rules and regulations (building regulations, safety regulations, by-laws, company laws and any other laws that may be applicable.
- Only 4 x 8mm raw bolts are supplied per box.
- We do not carry any duplicate or master keys, please keep them in a safe place. Do not leave keys in the lock.
- Any reproduction in whole or in part of the secure-a-box is strictly prohibited.
- The manufacturer does not accept any damages, including consequential, lost profits, lost equipment, special, indirect or incidental damages.
Disclaimer
This disclaimer is for any instructions posted on this site. No warranty or guarantee is provided for these instructions. You follow them at your own risk. No one at Engraveit cc (trading as Secure A Box) can vouch for their completeness or accuracy. If you are at all uncomfortable or inexperienced to do the installation, please reconsider doing the job yourself and find a reputable handyman to do the installation.